Fiber Optic Receiver for HDMI, Audio, and RS-232
Model: FOXBOX Rx HDMI SM
Giá bán: Call
Đặt hàng trước 45 ngày

Optical fiber interconnection between transmitter and receiver
   Number/type   2 fiber optic
   Connectors     2 LC connectors
   Operating distance      
      Singlemode             30 km (18.75 miles) with singlemode (SM) cables
Nominal peak wavelength            1310 nm for FOXBOX SM
   Data rate        4.25 Gbps
       Maximum receiver sensitivity            
      Singlemode             -18 dBm, typical
       Optical loss budget  
      Singlemode             13 dB, maximum
Resolution range            Up to 1920x1200 or 1080p @ 60 Hz pixel for pixel
   Formats         RGB, YCbCr, and xvYCC digital video
   EDID  Supports emulation of custom or factory preset Extended Display Identification Data (EDID) tables.
   HDCP             Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI 1.3 standards
   Standards       DVI 1.0, HDMI 1.3, HDCP 1.1, CEA-861E
Video output
   Number/signal type     1 single link HDMI
   Connectors     1 female HDMI type A
   Nominal level  0.8 Vp-p
   Video delay     1-2 frames
Audio
   Gain   
      Range         Adjustable, -18 dB to +10 dB
      Default        Unbalanced output: 0 dB
   Frequency response    20 Hz to 20 kHz, ±0.5 dB
   THD + Noise   0.10% @ 1 kHz at nominal level
   S/N    >80 dB at maximum output (unweighted)
   CMRR             65 dB @ 20 Hz to 20 kHz
   Audio bits per sample  18 bits per channel, 2 channels (L, R)
   Sampling rate             48 kHz
Audio output
   Number/signal type     1 balanced/unbalanced stereo or 2 balanced/unbalanced mono
   Connectors     (1) 3.5 mm captive screw connector, 5 pole
   Impedance     50 ohms unbalanced
   Nominal level  +4 dBu (1.23 Vrms), -10 dBV (316 mVrms)
   Maximum level (Hi-Z)   +11.0 dBu, balanced at 1% THD+N
   Maximum level (600 ohm)        >10.0 dBu, balanced at 1% THD+N
   Audio delay     1.5 frames
Control/remote
   Serial control ports on each unit
      Control        1 RS-232, 2.5 mm mini stereo jack (front panel)
      Pass-through           1 RS-232, 3.5 mm captive screw connector, 5-pole (3 pins are used) (rear panel)
   Baud rate and protocol             
      Control        9600 baud, 8 data bits, 1 stop bit, no parity
      Pass-through           9600 to 115,200 baud
   Serial control pin configuration             Mini stereo jack: tip = Tx, ring = Rx, sleeve = GND
Captive screw: 1 = Tx, 2 = Rx, 3 = GND
   Program control          Extron control/configuration program for Windows®
Extron Simple Instruction Set (SIS™)
General
   Power supply  External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1 A, 12 watts
   Power consumption     
      Device         5.7 watts, 12 VDC
      Device and power supply       7.2 watts, 12 VDC
   Temperature/humidity             Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling           Convection, vents on top and side panels
   Thermal dissipation     
      Device         16.1 BTU/hr
      Device and power supply       21.3 BTU/hr
   Mounting        
      Rack mount             Yes, with optional rack shelf
      Furniture mount       Yes, with optional under desk mounting kit
   Enclosure type            Metal
   Enclosure dimensions  1.0" H x 4.3" W x 6.0" D (quarter rack wide)
                                    (2.5 cm H x 10.9 cm W x 15.2 cm D)
(Depth excludes connectors.)
   Product weight            0.7 lbs (0.3 kg)
   Shipping weight          3 lbs (2 kg)
   Vibration        ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance             
      Safety         CE, c-UL, FDA Class 1, UL
      EMI/EMC     CE, C-tick, FCC Class A, ICES, VCCI
   MTBF             30,000 hours
   Warranty        3 years parts and labor
Chia sẻ ý kiến
 
 
Facebook Google Twitter Bookmark Print
     
     
     Đầu trang